Описание

  • Safety switches with integrated read head and integrated evaluation unit.
  • LED diagnostic displays
  • switch-on distance 9 mm
ActuatorAn appropriate actuator to suit the read head selected is required. The dimensions of the actuators are the same as those of the read heads, although the former have no connection cable. AS-Interface inputs
D0 - D3Switch actuated/open
Evaluation is performed via a safety monitor. AS-Interface output
D1LED 1 on read head (only CMS-R-AZA...)
LED function display
  • The ASI LED (dual LED red/green) displays the colors red, green and yellow. The status of the switch and the bus is indicated via this LED.
  • LED 1 can be connected via the AS-Interface bus, e.g. to indicate the door state.
Principle of operationReed contacts are installed in the read head of the safety system CMS. The contact blades on the reed contacts are closed under the influence of the magnetic field from the actuator. The read head only responds to the specific mating component, that is a specific actuator which is allocated to the read head type. Dimension drawing
Design A
Material
Cable material PUR
Housing material Reinforced thermoplastic (PPS), fully encapsulated
Weight
Net 0,1 kg
Ambient temperature -25 ... 60 °C
Degree of protection IP67
Mechanical life 100 x 106
Installation orientation Any, pay attention to marking
Reaction time
After change in the actuation status max.5 ms
Connection Hard-wired encapsulated cable with plug connector M12
Cable length 1 m
Method of operation Magnetic, reed contact
Electrical connection ratings
ASi voltage 30 V 26,5 ... 31,6 V
ASi operating current max.30 mA
ASi slave type
According to ASI specification 3.0 EA code: 7
ID code: B
ASi data in
According to ASI safety at work D0,D1,D2,D3
ASi data out
LED red D1
ASi LED
LED red flashing Fault
LED green Normal operation
LED red No data exchange between master and slave
LED red/yellow alternately flashing No data exchange between master and slave
LED red/green alternately flashing Fault
Work area
Switch-on distance 9 mm
Assured switch-off distance Sar max.70 mm
Center offset 2,5 mm
Other
In compliance with EN 60947-5-3: 2013, EN ISO 13849-1: 2008, EN ISO 14119: 2013, EN 62026-2: 2013 (AS-i)
Reliability values according to EN ISO 13849-1
Monitoring of the safety guard position
Category 3
Performance Level PL e
B10D 3 x 106
PFHD 4.29 x 10-8
Mission time 20 y
''